Wire rope clip 26mm

Why Wire Rope Clips Cannot Be Used Indiscriminately Regardless of Left or Right Orientation

As is well known, the primary purpose of wire rope clips is to secure the ends of wire ropes. Typically, the outer layer of a wire rope consists of six strands twisted at an angle in a right-hand direction. However, not all wire ropes on the market are right-hand twisted; left-hand twisted ropes are becoming increasingly common. According to the GB/T5976-2006 national standard for wire rope clips, it is explicitly required that the surface of the wire rope must match the twist direction of the clip's saddle groove. This means that if the wire rope is left-hand twisted, a left-hand oriented wire rope clip must be selected to comply with usage standards. Due to cost competition in the market, most products are primarily made of ordinary cast iron (also known as malleable iron), and market demand factors have led to a lack of left-hand twisted clips. Some gray iron cast clips are even used for critical wire rope applications. According to the GB/T5976-2006 national standard, when wire rope clips are used on lifting machinery, it is recommended to use (forged national standard) wire rope clips for better performance. Tiren Machinery, based on customer needs, can provide wire rope clips in sizes ranging from 6-60mm, fully meeting national standards for both left-hand and right-hand twisted specifications. The manufacturing process is forging, and the mechanical properties of the selected materials meet or exceed standard quality requirements. In an era of economic development and progress, standardized and safe products are increasingly valued by users. Proper selection and standardized usage are becoming deeply ingrained.